ABB is pleased to announce the availability of a new range of transfer (1-0-2) disconnect switches. The new compact design covers the current range of 16A to 100A. The existing design covers up to 1200A.

• UL listed ( UL508 or 98 ), CSA approved, IEC rated, CE marked
• 16…100Amps, 600VAC
• Finger safe
• DIN rail or tabs for back panel mounting
• Up to 4 pole construction with additional power poles
• Wide range of accessories: auxiliary contacts, power poles, terminal shrouds, shafts, handles etc.
• Typical applications: Line power control switching between main and backup power supplies, and motor reversing, etc.

ABB offers DP contactors in 30A, 40A or 60A Ranges. Type DP contactors are perfect for most low cost OEM applications: Motor control, Power supplies, Food service equipment, Business machines, Resistive heating, Air conditioning, Compressor control, Refrigeration equipment, and Welding machines.

Available in:

• 30A - 1, 2, 3, or 4 pole
• 40A - 2, 3, or 4 pole
• 60A - 3 Pole

Features Include:

ABB is pleased to announce a new plotter. This plotter offers many additional features listed below. It is a rugged industrial design rated for years of reliable operation. Improved machined base plate/template for RC/RCT terminal block markers, is more durable, enables better accuracy and is less expensive to maintain. In addition to terminal block marking, templates are available for other components.

• Unique Pen Handling & Sealing - has a silicone sealer built in that will keep the tip of the pen moist.
• Plotter Pen Test - draws a pattern on a dedicated spot prior to plotting on the marker; ensures every tag will be marked correctly
• Template Recognition System - automatically detected by the software and displays only associated markers.
• Increased Spacing - 15mm spacing between the pen tip and the bed, can plot thicker markers.
• Applications with accessory templates - Marking: wire and cables, ferrules, mounting panels, components and push-button tags.
• Accessory Tools - New tools, like an engraving tool, will be available soon.

A new addition to ABB's Advant Controller 31 family of products; a hardware PLC on a full size PCI, PC-card. It operates totally independent of Windows. This PLC runs from onboard memory. It will continue to operate even when the PC is turned off!

• Powered from external 24 VDC, independent of PC power
• Can also use PC as Man-Machine Interface (MMI)
• Programming software contains MMI software and OPC and DDE servers
• Onboard 480 kByte of RAM and Flash EPROM memory
• Optional 8 MB Smart Media card for reloading controller program and data storage
• Controls up to 992 Digital I/O and 448 Analog I/O
• Communicates with I/O via most open fieldbus protocols
• Built in PI and PID controllers
• Performs 32 Bit arithmetic with Bit or word manipulation

ABB expands its ProgramaCube family of products with the ERPQ Series. The ERPQ is a factory programmed timer/counter/logic module. It is equivalent to two ProgramaCubes (plus much more) in one package. UL, CSA, approved modules are programmed with your custom or standard function. Reduce your control circuit cost for timers and predetermined counters. Faster prototypes and faster production quantities than traditional custom designed controllers. A low, 100 piece minimum order is required to start a custom ERPQ project.

• Can Replace up to 6 Separate Timers
• Cost Effective for OEM Equipment
• Can Create Custom Functions from 24 Standard Timing Functions
• Dual Isolated SPDT Relay Outputs
• Dual Initiate Switches to Start or Reset Functions
• 4 Onboard or External Adjustments or fixed counts or time delays
• 12 to 230 V Input Voltages, in 5 Ranges
• 3 LED Indicators, Input Voltage - Green; Relay Energized - Red LED's
• UL Recognized, CSA Approved, CE; 10 Year Warranty

ABB cam switches are available from 10 to 200 amperes with up to 20 contacts and 12 positions. Hundreds of standard contact configurations are available: Stop & Start, Transfer, HVAC, Step, and Volt & Amp-meter switches. We also provide fast and accurate custom configuration. The two smallest frames, OM and ON are UL Listed and have improved 10A & 25A ratings.

• Fast snap on mounting through standard pilot device hole
• Handles rated to NEMA 4X are standard
• Finger protected terminals are standard
• User friendly cabling from back, better than from side
• Cabling from top & bottom enables increased installation density
• Double break gold plated contacts ensure reliable switching

Are you wasting time and money while connecting components on traditional DIN rail? ABB's new line of high profile aluminum rail may be the answer. Now In Stock for immediate delivery.

• This Aluminum rail comes in both 90 degree and 30 degree angles.
• Is stocked in one and two meter lengths.
• The high profile makes it ideal for applications where increased distance from the back panel decreases wiring time of din rail mounted components.
• The 30 degree angled version improves field wiring of DIN components.
• The increased number of holes in the vertical wall of the rail reduces the wire and labor required to pass the wire through to the opposite side of the rail.
• ABB/Entrelec high profile aluminum rail is available from stock and is competitively priced.
  

Limit Switches

• UL listed
• Thermoplastic fiberglass offered in 30mm & 40mm
• Thermoplastic fiberglass has double insulation UL Type 4 and IP65 UL-V0 protection.
• Aluminum Alloy offered in 40mm & 60mm
• Aluminum alloy has UL Type 4x and IP66 protection
• Individual components available
• Applications: Able to switch high currents (10A Conventional Switching Current)
• Electrically separated contacts
• Immune to electromagnetic disturbances

• UL listed
• Thermoplastic fiberglass has double insulation UL Type 4 and IP65 UL-V0 protection.
• Conforms to the standards:  IEC/EN 60947-5-1, EN 1088 and EN954-1
• Straight or right angle key available; with or without shock absorber
• Switches available with stainless steel rotative axis
• Thermoplastic fiberglass offered in 30mm